• Ahuja C-650/750 650W RMS

    • Professional 2-Way Passive Crossover Network.
    • Designed for use with 1 nos. LF woofer AHUJA Model L15-MB500 or L12-MB650.
    • HF driver CDH-1000.
    • PTC for HF protection.
    • High power and Low resistance Air core coils.
    • High quality metallised polyester capacitors.
  • Ahuja C-650SW 650W RMS Crossover Network

    • Professional 1-Way Passive Crossover Network.
    • Designed for use with 1no. subwoofer Ahuja model L18-SW650.
    • Also usable with 1 no. Subwoofer system Ahuja model SWX-650.
    • High power and Low resistance coils.
    • High quality metallised polyester capacitors.
  • Ahuja C-80HF 500W RMS Crossover Networks

    • Professional 1-Way Passive HF Crossover Network for HF Driver.
    • Designed for use with 2-Way Speaker System using 1 no. comprision driver AHUJA model CD-80.
    • High power and Low resistance coils.
    • High quality metallised polyester capacitors.
  • Ahuja CCS-2200 COUNTER COMMUNICATION SYSTEM AC Operation

    • Unique design, pleasing aesthetics & rugged construction.
    • Duplex communication technology, ideal for ticket counters, enquiry counters, banks, embassies, hospitals etc. …. Wherever two way communication is required across a glass barrier. (Can also be used for one way communication).
    • Compact & elegant Attendant Unit with gooseneck microphone, in black colour finish, for flexible sound pickup angle.
    • Separate switches for switching the Host Unit mic, or the External Unit mic, ON or OFF.
    • Separate volume controls on the Host Unit for adjusting the audio output level of the Host Unit and the External Unit.
    • Host Unit mic has automatic voice priority over the External Unit mic. When attendant is speaking into the Host Unit mic, the mic of the External unit is automatically muted.
    • Exclusively designed lightweight plastic external unit, which can be easily mounted on any flat surface. Double sided fixing pad provided.
    • External unit houses a condenser mic cartridge and an efficient speaker for clear and intelligible sound outside the glass barrier.
    • Audio output for recording available through 3.5mm phone jack on the Host Unit. This is a stereo output having signals from both the Host Unit mic and the External Unit mic.
    • A 3.5mm phone jack is provided on the rear panel of the Host Unit for Line Input. This feature can be used to play back pre-recorded messages through the external unit speaker by connecting the Pre-amp output or Line Output of any Ahuja amplifier to the Line Input of the Host Unit.
    • The system is easy to install and simple to operate.
    • The Host Unit is a table top unit which operates on 12V DC, through an AC adapter supplied alongwith.
  • Ahuja CCS-2300 Counter Communication System AC Operation

    • AHUJA introduces CCS-2300, a two-way counter communication system, exclusively designed for easy and effective conversation across counters with transparent security barriers. It consists of an attendant unit, a customer unit and a power supply unit, which are easy to install and simple to connect through dedicated cables as supplied with the system.
    • Unique design, pleasing aesthetics & rugged construction.
    • Two-way, hands-free communication.
    • Easy, hassle-free installation.
    • Compact & elegant table top attendant unit with 20” long gooseneck microphone for strain-free usage.
    • A 3.5mm jack socket is provided for connecting a headband microphone like Ahuja HBM-50. This is useable by the attendant as an alternate to the fixed gooseneck microphone.
    • Separate controls for adjusting the speech levels during Talk & Listen modes of operation.
    • Special Auto-Mute ON/OFF option provided through a toggle switch. In Auto-Mute ON condition, the customer’s microphone is partially muted if it is not used for 30 sec. approx. This facility prevents the attendant from being disturbed by unwanted outside noise.
    • The customer’s unit has an efficient speaker and a sensitive condenser cartridge, mounted in a beautifully designed housing.
    • Attendant’s microphone has voice priority over the customer’s microphone.
  • Ahuja CD-50S 50 WATTS PA Compression Driver

    Professional compression driver CD-50S, suitable for high power speaker systems. It features TITANIUM diaphragm EDGE WOUND copper clad aluminium ribbon wire voice coil and strontium ferrite magnet for high SPL & superb HF response. With a suitable horn it is ideal for use with low frequency speakers AHUJA L15-MB300, L15-MB400 and L15-MB500.

  • Ahuja CD-80 80 Watts PA Compression Driver

    • Ahuja introduces a professional compression driver CD-80, suitable for high power speaker systems. With a suitable horn it is ideal for use with low frequency speakers AHUJA   L15-MB300, L15-MB400 and L15-MB500.
    • 80 Watts power handling capacity
    • 600 Hz cut-off frequency
    • Recommended crossover frequency 2.5kHz.
    • Strontium ferrite magnet
    • High SPL of 108 dB
    • TITANIUM diaphragm
    • EDGE WOUND copper clad aluminium ribbon wire voice coil
    • Voice coil former of resin bonded KAPTON
  • Ahuja CD-80S 80 WATTS PA Compression Driver

    Professional compression driver CD-80, suitable for high power speaker systems. It features TITANIUM diaphragm EDGE WOUND copper clad aluminium ribbon wire voice coil and strontium ferrite magnet for high SPL & superb HF response. With a suitable horn it is ideal for use with low frequency speakers AHUJA L15-MB300, L15-MB400 and L15-MB500.

  • Ahuja CDH-1000 100 WATTS PA Compression Horn Driver

    Professional heavy duty 2” throat compression driver-horn loudspeaker CDH-1000 (Horn H-7380 + Driver CD-750) is suitable for very high power speaker systems. It reproduces Mid and High frequencies with superb accuracy. Ideal for use with 2 nos. Low Frequency speakers AHUJA L15-LF500 to make a 1000 watts speaker system. It can also be used with a single L15-LF500. The horn is made of solid glass filled ABS. It has been designed specifically for all outdoor sound reinforcement applications.

  • Ahuja CDH-200 20 WATTS PA Compression Horn Driver

    Professional compression driver-horn CDH-200 loudspeaker, is suitable for medium power speaker systems. It is ideal for use in a 200W to 300W system. Can be combined with a single Low Frequency speaker like L12-MB150 or L15-MB300, to make an excellent medium power full range speaker system.

  • Ahuja CDH-800 80 WATTS PA Compression Horn Driver

    Professional compression driver-horn CDH-800 loudspeaker, suitable for high power speaker systems. Owing to its titanium diaphragm the HF response is superb. Ideal for use with 2 nos. Low Frequency speakers AHUJA L15-MB300 to make a 600 watts speaker system. It can also be used with a single L15-MB300. The solid glass filled ABS horn has a very even radiation and excellent sound. Thus it is ideal for all indoor as well as outdoor PA and professional DJ applications.

  • Ahuja CMA-4400 50 WATTS Central Mixer Amplifier

    • Ahuja CMA-4400 Price in bd, The Ahuja CM-4000 Conference System provides the much required sound reinforcement at meetings while eliminating problems of poor intelligibility and acoustic feedback. The system is ideal for use in a variety of applications in Boardrooms, Large Conference Halls as well as open conferencing in Convention Centres.
    • Highly sensitive 16″ long gooseneck microphone for comfortable sharing by two delegates.
    • Bright and clear ring LED indicator.
    • Compact and attractive die cast aluminium cabinet in a unique profile.
    • Headphone output available from each unit.
    • Automatic Mic Off feature in Delegate units.
    • Unique Send/Return facility through a stereo jack in Central Amplifier CMA-4400.
    • Chairman Unit has Priority Switch.
    • Record & playback the messages with the Secretary Unit.
    • AC Mains & 24V DC operation.
    • Central Amplifier is 19″ rack mountable.
    • Three Mic inputs and one Aux input for various user applications.
    • 50W PA Amplifier for adequate sound reinforcement.
    • System expansion possible through Conference Expansion Unit CMB-4500.
    • Conference System can be installed in a bus bar arrangement by using Junction Boxes CB-45.

Main Menu