Ahuja AMX-1412 14 Channel AC & 24V DC Operation

In stock

  • Input Channels : Each Channel has separate 1/4” balanced phone jack for Mic and Line & accepts both balanced & unbalanced signals.
  • AUX Control : This controls the level of the channel in the final mix to Aux Send output.
  • AUX Send & AUX Return : These have been provided for sending the pre-fader output of channels for monitoring or for adding a Special Effects Unit.
  • MONO/STEREO Output : Mono output is available from either Left & Right output jacks when the switch is in ‘Mono’ position.
  • Each channel has GAIN, BASS, MID, TREBLE, ECHO, PAN and slide LEVEL controls with CLIP LED indicator.
  • Echo section provided with Delay, Repeat & Level controls. Tape section for Record & Playback facility.

Ahuja AMX-1412

Power RequirementsAC: 220-240V 50/60Hz, DC: 24v (2×12V Car Battery)
MIC INPUT (Impedance/Gain)2kΩ/62dB
LINE INPUT (Impedance/Gain)20kΩ Balanced/42dB, 10kΩ Unbalanced/42dB
Distortion< 0.08%
Frequency Response30Hz – 20kHz (+0, -1dB)
Tone ControlsBass : ±12dB at 100Hz, Mid : ±12dB at 2kHz, Treble : ± 12dB at 10kHz
OUTPUT.
Line Output LO-10dBm/+2dBm (200mV/1V)
Line Output HI0dBm/+17dBm (775mV/5.5V)
ECHO/Reverb SystemDigital Signal Processing
Signal to Noise Ratio>70dB (0dBm, 0.775V)
DimensionsW633 × H93 × D420 mm
Weight9.4kg
Be the first to review “Ahuja AMX-1412 14 Channel AC & 24V DC Operation”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Main Menu